|Scott Hazen Mueller||Nov 22, 2000 10:13 am|
|Duncan Barclay||Nov 24, 2000 3:56 pm||.txt, .txt|
|Scott Hazen Mueller||Nov 25, 2000 10:42 pm|
|Duncan Barclay||Nov 26, 2000 4:40 am|
|Scott Hazen Mueller||Nov 27, 2000 11:46 pm|
|Duncan Barclay||Nov 28, 2000 12:07 am|
|Warner Losh||Nov 28, 2000 12:24 am|
|Peter Radcliffe||Nov 28, 2000 10:05 am|
|Scott Hazen Mueller||Nov 28, 2000 12:42 pm|
|Warner Losh||Nov 28, 2000 12:51 pm|
|Richard Johnson||Nov 29, 2000 9:21 pm|
|Peter Radcliffe||Nov 30, 2000 9:34 am|
|From:||Scott Hazen Mueller (sco...@zorch.sf-bay.org)|
|Date:||Nov 22, 2000 10:13:11 am|
So, I'm trying out the newly-committed raylink driver on a pair of Aviator 2.4 (plain, not Pro) cards. The cards are both firmware rev 4. Has anyone gotten these working in a FreeBSD-to-FreeBSD configuration? I have two systems, running a recent (post-commit) -current. The cards are properly recognized by pccardd and the raycontrol program sees the settings and makes reasonable modifications. It actually looks like the two cards just plain aren't seeing each other. The 'BSS Id' values are never the same on the two systems, even those I've set the SSID to the same thing repeatedly. As nearly as I can tell from reading a little about 802.11, the BSS Id is supposed to be the same. Also, both cards always have a 0x01 for 'Current INITED'.
Oh, and I've also tried varying the location - one of the systems is sitting on a monitor arm (it's my old laptop) about 6 feet above floor level. The other has been sitting almost directly underneath it, but I've varied the location from nearby to 20 ft away with no luck.
The only other major data point I can think of is that I've never tried using these on a Win9x system, so if the Win drivers make some persistent config change I've missed out on that.
Firmware version 4 Network type 0x00 0 Ad hoc, 1 Infrastructure AP status 0x00 0 Station, 1 Access Point SSID sf-wireless Scan mode 0x01 0 Passive, 1 Active APM mode 0x00 0 Off, 1 On MAC address 00:00:8f:48:e8:d2 Fragmentation threshold 0x7fff Bytes Dwell time 0x04 DWELL_TIME Beacon period 0x01 BEACON_PERIOD DTIM_INTERVAL 0x01 DTIM_INTERVAL MAX_RETRY 0x07 MAX_RETRY ACK_TIMO 0xa3 ACK_TIMO SIFS 0x1d SIFS DIFS 0x82 DIFS PIFS 0xce PIFS RTS_THRESH 0x7fff RTS_THRESH SCAN_DWELL 0xfb1e SCAN_DWELL SCAN_MAX_DWELL 0xc75c SCAN_MAX_DWELL ASSOC_TIMO 0x05 ASSOC_TIMO ADHOC_SCAN_CYCLE 0x08 ADHOC_SCAN_CYCLE INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE INFRA_SUPER_SCAN_CYCLE 0x08 INFRA_SUPER_SCAN_CYCLE PROMISC 0x00 PROMISC UNIQ_WORD 0x0cbd UNIQ_WORD SLOT_TIME 0x4e SLOT_TIME ROAM_LOW_SNR_THRESH 0xff ROAM_LOW_SNR_THRESH LOW_SNR_COUNT 0xff LOW_SNR_COUNT INFRA_MISSED_BEACON_COUNT 0x05 INFRA_MISSED_BEACON_COUNT ADHOC_MISSED_BEACON_COUNT 0xff ADHOC_MISSED_BEACON_COUNT COUNTRY_CODE 0x01 COUNTRY_CODE HOP_SEQ 0x03 HOP_SEQ HOP_SEQ_LEN 0x4e HOP_SEQ_LEN CW_MAX 0x3f CW_MAX CW_MIN 0x0f CW_MIN NOISE_FILTER_GAIN 0x04 NOISE_FILTER_GAIN NOISE_LIMIT_OFFSET 0x08 NOISE_LIMIT_OFFSET RSSI_THRESH_OFFSET 0x28 RSSI_THRESH_OFFSET BUSY_THRESH_OFFSET 0x28 BUSY_THRESH_OFFSET SYNC_THRESH 0x07 SYNC_THRESH TEST_MODE 0x00 TEST_MODE TEST_MIN_CHAN 0x02 TEST_MIN_CHAN TEST_MAX_CHAN 0x02 TEST_MAX_CHAN Current BSS Id 5e:7c:3c:4d:ab:dd Current INITED 0x01 0 Joined a net, 1 Created a net Current DEF_TXRATE 0x04 Current DEF_TXRATE Current ENCRYPT 0x00 Current ENCRYPT Current NET_TYPE 0x00 Current NET_TYPE Current SSID sf-wireless Current PRIV_START 0x00 Current PRIV_START Current PRIV_JOIN 0x00 Current PRIV_JOIN Desired BSSID 00:00:00:00:00:00 Desired INITED 0x00 N/A Desired DEF_TXRATE 0x04 Desired DEF_TXRATE Desired ENCRYPT 0x00 Desired ENCRYPT Desired NET_TYPE 0x00 Desired NET_TYPE Desired SSID sf-wireless Desired PRIV_START 0x00 Desired PRIV_START Desired PRIV_JOIN 0x00 Desired PRIV_JOIN Current AP_STATUS 0x00 Current AP_STATUS Current PROMISC 0x00 Current PROMISC Desired AP_STATUS 0x00 Desired AP_STATUS
To Unsubscribe: send mail to majo...@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message