I have a Pentuim II 266MHz running FreeBSD 2.2.6 on one partition and
Win95 on another with an internal pnp modem (CommWave 336) on a isa slot
I can get the kernel to see it but I dont know how to access the actual
I set the modem to have irq 9 and port 0x2e8 (com4 type settings) but
I cant seem to talk to the modem using /dev/cuaa3 (i tried this using
tip to talk to the modem directly)
I have attached the output from 'dmesg' too
Thanks in advance,
I hope someone corrects me if I'm wrong, but I believe you will
need to rebuild the kernel, activating the sio2 and sio3 devices.
You may need to add a line "controller pnp0" to the
kernel config file, as well.
chip2 <Intel 82371AB PCI-ISA bridge> rev 1 on pci0:2:0
chip3 <Intel 82371AB IDE interface> rev 1 on pci0:2:1
chip4 <Intel 82371AB USB interface> rev 1 int d irq 11 on pci0:2:2
chip5 <Intel 82371AB Power management controller> rev 1 on pci0:2:3
vga0 <VGA-compatible display device> rev 84 int a irq 12 on pci0:13:0
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: ESS1868 [0x68187316] Serial 0xffffffff
CSN 2 Vendor ID: PCP2880 [0x80287040] Serial 0x01000000
sio4: probe failed
sio4 (siopnp <PCP2880> sn 0x01000000) at 0x2e8 irq 9 drq -1 flags 0x0 id 20
Is this a probe on the PCI bus?
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
Shouldn't the modem have been found /here/?
Unix System 7:
an improvement on all other Unix releases, previous and subsequent.
To Unsubscribe: send mail to majo...@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message