System: FreeBSD blobby.home 5.3-STABLE FreeBSD 5.3-STABLE #1: Mon Dec 27
22:13:33 CET 2004 ro...@blobby.home:/usr/src/sys/i386/compile/BLOBBY i386 Kernel upgraded by cvsup on 2004/12/27 Uses the new cardbus yenta drivers :

pci1: <ACPI PCI bus> on pcib1 cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> irq 5 at device 3.0 on pci1 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> irq 5 at device 3.1 on pci1 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1

/boot/loader.conf: hw.pci.allow_unsupported_io_range=1 hw.pccard.cis_debug=1

Only one of the two pcmcia slots is working on my laptop when using 16-bit PCMCIA cards. I've tested which several 16-bit pcmcia cards : - U.S. Robotics IEEE 802.11b PC-CARD - Xircom CreditCard 10/100

They work fine when plugged on pccard0, but when plugged on pccard1 nothing is detected (pccard1: Card has no functions!)

For information, cardbus cards seem to react the same on _both_ ports... But I can't do meaningful testing since my only Cardbus card panics the OS.

- plug Xircom card into pccard1 slot

- here is what I get in dmesg :

cis mem map 0xd103e000 (resource: 0x88000000) pccard1: CIS tuple chain: CISTPL_DEVICE type=null speed=null 01 02 00 ff CISTPL_DEVICE type=null speed=null 01 02 00 ff CISTPL_VERS_1 15 2c 05 00 15 2c 05 00 6f 6d 00 43 6f 6d 00 43 74 43 61 72 74 43 61 72 2f 31 30 30 2f 31 30 30 2d 31 30 2f 2d 31 30 2f 31 2e 30 30 31 2e unhandled CISTPL 30 30 30 b1 35 e0 00 b1 35 e0 00 20 05 05 01 20 05 05 01 04 ab 73 21 04 ab 73 21 01 00 08 03 01 00 08 03 bd 7f 55 4d bd 7f 55 4d 06 e0 17 17 06 e0 17 17 unhandled CISTPL f 0f 70 bc 8e 0f 70 bc 8e 02 06 00 22 02 06 00 22 80 c7 b1 35 80 c7 b1 35 02 22 05 02 02 22 05 02 22 05 02 00 22 05 02 00 02 03 01 22 02 03 01 22 02 05 00 ff 02 05 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff CISTPL_END ff cis mem map d103e000 CISTPL_LINKTARGET expected, code 00 observed pccard1: Card has no functions! cbb1: PC Card card activation failed

For comparison, here is what happens when plugging the same card into slot pccard0:

cis mem map 0xd103e000 (resource: 0x88000000) pccard0: CIS tuple chain: CISTPL_DEVICE type=null speed=null 01 02 00 ff CISTPL_DEVICE_A type=null speed=null 17 02 00 ff CISTPL_VERS_1 15 2c 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43 61 72 64 20 31 30 2f 31 30 30 00 43 45 33 2d 31 30 2f 31 30 30 00 31 2e 30 30 00 ff unhandled CISTPL 88 88 08 b1 35 e0 00 00 00 00 00 CISTPL_MANFID 20 05 05 01 0a 01 43 unhandled CISTPL 44 44 04 ab 73 21 24 CISTPL_CONFIG 1a 05 01 01 00 08 03 CISTPL_CFTABLE_ENTRY 1b 19 c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60 00 00 0f 70 bc 8e 10 00 20 CISTPL_FUNCID 21 02 06 00 CISTPL_FUNCE 22 08 04 06 00 80 c7 b1 35 e0 CISTPL_FUNCE 22 02 01 02 CISTPL_FUNCE 22 05 02 80 96 98 00 CISTPL_FUNCE 22 05 02 00 e1 f5 05 CISTPL_FUNCE 22 02 03 01 CISTPL_FUNCE 22 02 03 03 CISTPL_FUNCE 22 02 05 00 CISTPL_END ff cis mem map d103e000 CISTPL_LINKTARGET expected, code 00 observed xe0: <Xircom CreditCard 10/100> at port 0x100-0x10f irq 5 function 0 config 1 on
pccard0 xe0: [GIANT-LOCKED] xe0: Xircom CreditCard 10/100, version 0x45/0x04, 100Mbps capable xe0: Ethernet address: 00:80:c7:b1:35:e0 xe0: if_start running deferred for Giant

I wish I could help you more :)

Anyway, thank you for such a great OS.

Best regards, Gael.