atom feed1 message in net.nether.puck.cisco-voip[cisco-voip] ISDN TROUBLE: 0x80A9 - T...
FromSent OnAttachments
Marcello PedersenApr 21, 2005 2:21 pm 
Subject:[cisco-voip] ISDN TROUBLE: 0x80A9 - Temporary failure
From:Marcello Pedersen (mped@touchbase.us)
Date:Apr 21, 2005 2:21:53 pm
List:net.nether.puck.cisco-voip

Hi Guys,

Brand new 2651xm with PRI NI2 connected to AT&T backhauled to CCM.

Clock is set to external. When I call ext 366195, the phone rings once and then
disconnects.

deb isdn q931 shows:

Apr 21 17:54:16 UTC: ISDN Se1/0:23 Q931: RX <- SETUP pd = 8 callref = 0x0E0A Bearer Capability i = 0x9090A2 Standard = CCITT Transer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8283 - Origination address is non-ISDN Calling Party Number i = 0x2183, '13050907059' Plan:ISDN, Type:National Called Party Number i = 0x80, '366195' Plan:Unknown, Type:Unknown Apr 21 17:54:17 UTC: ISDN Se1/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref =
0x8E0A Cause i = 0x80A9 - Temporary failure

I looked up Temporary Failure and I get:

This cause indicates that the network is not functioning correctly and that the
condition is not likely to last a long period of time: e.g., the user may wish
to try another call attempt almost immediately.

QUESTION:

Is this pretty dead on? or can it be an issue on the configuration of the router
/ CCM? I copied the run config from my test 2651xm that is working.

I tried a different cable to the NIU but still got the same message.

Any help is appreciated.

Thanks, Marcello

______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email

______________________________________________________________________