Ryan,
The answer is right below output of "show ver" on active SUP:
Router#sh ver
Cisco Internetwork Operating System Software
...<snip>
16384K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory. <---------HERE
Configuration register is 0x2102
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisc...@puck.nether.net] On Behalf Of Ryan
Sent: Friday, January 28, 2005 12:49 PM
To: 'Gert Doering'
Cc: cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Standby Sup2/MSFC2 on 7609
darn...
router#remote command mod 2 remote command swi sh ver
router-sdby-sp#
Line has invalid autocommand "remote command swi sh ver"
-----Original Message-----
From: Gert Doering [mailto:ge...@greenie.muc.de]
Sent: Friday, January 28, 2005 1:32 PM
To: Ryan
Cc: 'Anthony D Cennami'; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Standby Sup2/MSFC2 on 7609
Hi,
On Fri, Jan 28, 2005 at 01:26:04PM -0700, Ryan wrote:
router#remote command module 2 sh ver | inc with router-sdby-sp# cisco
Catalyst 6000 (R7000) processor with 112640K/18432K bytes of memory.
remote command module 2 remote command switch show ver
-> something like this, maybe?
gert
10 messages in net.nether.puck.cisco-nsp[c-nsp] Standby Sup2/MSFC2 on 7609
