Have seen something possibly like this once before; the solution apparently
was simply to do the upload twice. The first attempt failed, the second
worked. (I can't remember if that was something we discovered by accident,
or if Cisco told us, or if we found a reference on CCO.) And it's bit
tedious I'll grant you given how long it takes to load the image even
once...
David
-----Message d'origine-----
De : cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] De la part de jordi
Envoy? : vendredi 28 janvier 2005 07:39
? : cisco-nsp at puck.nether.net
Objet : [c-nsp] Error after uploading the IOS via Xmodem
6509 Modules:
1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
Multilayer Switch Feature WS-F6K-MSFC2 no ok
Error messages:
rommon 3 > xmodem -c
Do you wish to continue? (y/n) [n]: y
Ready to receive file ...Will wait for a minute
C
Download Complete!
Uncompressing file: ######################
*** Bus Error (Load) Exception ***
Uncompressing file: ######################
*** Bus Error (Load) Exception ***
Access address = 0x
*** Coprocessor Unusable Exception ***
PC = 0x80010604, Cause = 0x2000802c, Status Reg = 0x3041c003
monitor: command \"xmodem\" aborted due to exception
rommon 4 > dir bootflash:
*** TLB (Load/Fetch) Exception ***
Access address = 0x5288
Access address = 0x5288
Is it something related to hardware? Thanks.
----
<br>
==================================================
963??
Corp WebMail System 2.0
2 messages in net.nether.puck.cisco-nsp[c-nsp] Error after uploading the IOS...
