atom feed6 messages in net.sourceforge.lists.smartmontools-support[smartmontools-support] HP Smart Arra...
FromSent OnAttachments
ROGERIO DE CARVALHO BASTOSJul 12, 2010 7:01 am 
Alex KedaJul 12, 2010 8:41 am 
ROGERIO DE CARVALHO BASTOSJul 12, 2010 9:50 am 
Alex KedaJul 12, 2010 10:51 am 
ROGERIO DE CARVALHO BASTOSJul 12, 2010 12:12 pm 
Alex KedaJul 17, 2010 10:02 pm 
Subject:[smartmontools-support] HP Smart Array E200i Controller
From:ROGERIO DE CARVALHO BASTOS (roge@dcc.ufba.br)
Date:Jul 12, 2010 7:01:43 am
List:net.sourceforge.lists.smartmontools-support

Hi,

I have problems with smartmontools and follow system: Debian Lenny, kernel 2.6.26-2-amd64 in a HP Proliant ML350 G5 with HP Smart Array E200i Controller and SATA disks.

This is the smartmontools' version: 5.38-2+lenny1 And thess are the outputs:

---------------- # smartctl -d cciss,0 -i /dev/cciss/c0d0 smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/

Serial number: 9QE4XJXJ Device type: disk Local Time is: Mon Jul 12 10:56:26 2010 BRT Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported

------------------- poseidon:~/smartmontools-install# smartctl -a -r ioctl,1 -d cciss,0 /dev/cciss/c0d0 smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/

cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Serial number: 9QE4XJXJ Device type: disk cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 scsiModePageOffset: response length too short, resp_len=1 offset=12 bd_len=8 Local Time is: Mon Jul 12 11:01:10 2010 BRT cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Log Sense failed, IE page [scsi response fails sanity test] cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 Read defect list: asked for grown list but didn't get it

Error Counter logging not supported cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01 status=0 scsiModePageOffset: response length too short, resp_len=1 offset=12 bd_len=8 Device does not support Self Test logging

-------------------- Any idea?

http://wiki.dcc.ufba.br/Main/RogerioBastos