atom feed122 messages in com.xensource.lists.xen-develRe: [Xen-devel] Announcing xen/master...
FromSent OnAttachments
Jeremy FitzhardingeSep 18, 2009 6:19 pm 
Marc - A. DahlhausSep 19, 2009 3:35 am 
Patrick ScharrenbergSep 19, 2009 7:45 am.png
Boris DerzhavetsSep 19, 2009 9:07 am.gz
Marc - A. DahlhausSep 20, 2009 12:29 pm.gz, .gz
Patrick ScharrenbergSep 20, 2009 10:57 pm 
Pasi KärkkäinenSep 20, 2009 11:22 pm 
Marc - A. Dahlhaus [ Administration | Westermann GmbH ]Sep 21, 2009 1:48 am 
Pasi KärkkäinenSep 21, 2009 2:02 am 
Marc - A. Dahlhaus [ Administration | Westermann GmbH ]Sep 21, 2009 2:17 am 
Konrad Rzeszutek WilkSep 21, 2009 7:38 am 
Konrad Rzeszutek WilkSep 21, 2009 7:43 am 
Konrad Rzeszutek WilkSep 21, 2009 8:06 am 
Pasi KärkkäinenSep 21, 2009 8:20 am 
Pasi KärkkäinenSep 21, 2009 12:24 pm 
Jeremy FitzhardingeSep 21, 2009 12:29 pm 
Pasi KärkkäinenSep 21, 2009 12:49 pm 
Jeremy FitzhardingeSep 21, 2009 1:20 pm 
Pasi KärkkäinenSep 21, 2009 1:26 pm 
Jeremy FitzhardingeSep 21, 2009 1:29 pm 
Pasi KärkkäinenSep 21, 2009 1:35 pm 
Patrick ScharrenbergSep 22, 2009 2:00 am 
Konrad Rzeszutek WilkSep 22, 2009 7:08 am 
Patrick ScharrenbergSep 23, 2009 12:37 am 
Konrad Rzeszutek WilkSep 23, 2009 5:06 am 
Konrad Rzeszutek WilkSep 23, 2009 5:09 am 
Christian TramnitzSep 23, 2009 6:15 am 
Jeremy FitzhardingeSep 23, 2009 12:22 pm 
Konrad Rzeszutek WilkSep 23, 2009 12:32 pm 
Jeremy FitzhardingeSep 23, 2009 1:09 pm 
Jeremy FitzhardingeSep 23, 2009 1:13 pm 
Jeremy FitzhardingeSep 23, 2009 1:30 pm 
Konrad Rzeszutek WilkSep 23, 2009 2:24 pm 
Jeremy FitzhardingeSep 23, 2009 2:55 pm 
Qing HeSep 23, 2009 8:10 pm 
Zhang, XiantaoSep 24, 2009 1:14 am.patch, .patch
Konrad Rzeszutek WilkSep 24, 2009 5:43 am 
Christian TramnitzSep 24, 2009 6:19 am 
Andy BurnsSep 24, 2009 10:46 am 
Jeremy FitzhardingeSep 24, 2009 11:22 am 
Thiago Camargo Martins CordeiroSep 24, 2009 11:29 am 
Patrick ScharrenbergSep 24, 2009 12:11 pm 
Thiago Camargo Martins CordeiroSep 24, 2009 12:31 pm 
Jeremy FitzhardingeSep 24, 2009 12:37 pm 
Jeremy FitzhardingeSep 24, 2009 12:55 pm 
Jeremy FitzhardingeSep 24, 2009 1:00 pm 
Konrad Rzeszutek WilkSep 24, 2009 2:35 pm 
Zhang, XiantaoSep 24, 2009 6:43 pm 
Pasi KärkkäinenOct 11, 2009 8:38 am 
Konrad Rzeszutek WilkOct 12, 2009 1:02 pm 
Pasi KärkkäinenOct 14, 2009 2:13 pm 
Konrad Rzeszutek WilkOct 15, 2009 1:03 pm 
Boris DerzhavetsOct 16, 2009 12:47 am.gz
Pasi KärkkäinenOct 16, 2009 2:01 am 
Konrad Rzeszutek WilkOct 20, 2009 9:57 am.patch
Pasi KärkkäinenOct 21, 2009 4:53 am 
Konrad Rzeszutek WilkOct 21, 2009 11:31 am 
Pasi KärkkäinenOct 21, 2009 11:51 am 
Jeremy FitzhardingeOct 21, 2009 12:49 pm 
Pasi KärkkäinenOct 21, 2009 1:21 pm 
62 later messages
Subject:Re: [Xen-devel] Announcing xen/master: pvops git trees rearranged
From:Marc - A. Dahlhaus [ Administration | Westermann GmbH ] (ma@wol.de)
Date:Sep 21, 2009 2:17:55 am
List:com.xensource.lists.xen-devel

Am Montag, den 21.09.2009, 12:03 +0300 schrieb Pasi Kärkkäinen:

On Mon, Sep 21, 2009 at 10:49:03AM +0200, Marc - A. Dahlhaus [ Administration |
Westermann GmbH ] wrote:

--8<--

title XEN pv_ops dom0 root (hd0,1) kernel /boot/xen.gz dom0_mem=512M loglvl=all guest_loglvl=all module /boot/bzImage-2.6.31-xen ro root=LABEL=ROOT earlyprintk=xen 4 module /boot/initramfs-2.6.31-xen

With this one i get no output from the kernel itself at all, i think i have some things build as modules in my .config that needs to be buildin for a working vga console (might be that i need to change the earlyprintk param to vga) but didn't had the time to hunt the problem down.

title XEN pv_ops dom0 with serial console root (hd0,1) kernel /boot/xen.gz dom0_mem=512M loglvl=all guest_loglvl=all com1=9600,8n1 console=com1 module /boot/bzImage-2.6.31-xen ro root=LABEL=ROOT console=ttyS0,9600n8 earlyprintk=xen 4 module /boot/initramfs-2.6.31-xen

That's the one i used to grab the log.

This is a i945 based box with an Core 2 Duo E8400 and 4GB Ram installed but only 2912584k usable because of an PCI-Card that supports only 32bit addressing (appropriated-ram-crap). Could this be a problem? I try to test again with 2GB Ram installed this evening and report if it gets any further...

Here are my working grub.conf entries for pv_ops dom0:

VGA text console:

title Fedora Xen pv_ops dom0-test (2.6.31-rc5) root (hd0,0) kernel /xen.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.31-rc5 ro root=/dev/mapper/vg_dom0test-lv01 module /initrd-2.6.31-rc5.img

Serial console:

title Fedora Xen pv_ops dom0-test (2.6.31-rc5) / serial console root (hd0,0) kernel /xen.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1
console=com1 module /vmlinuz-2.6.31-rc5 ro root=/dev/mapper/vg_dom0test-lv01
console=hvc0 earlyprintk=xen module /initrd-2.6.31-rc5.img

When using serial console with Xen you don't need to specify serial console
stuff for the dom0 kernel.. Also note the 'console=hvc0' for dom0 kernel..

Isn't the selection of hvc0 as main console supposed to work out automatically? Looks like a bug if it isn't. Anyway thanks for the hint. Will give it a try with a grub config adapted to yours later today.

Are there still problems related to specific CONFIG_ options which i should deactivate in my build?

The xen related options i used (only frontends build as modules):

[mad@darkstar ~]$ grep XEN /boot/config-2.6.31-xen CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=8 CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_DOM0_PCI=y CONFIG_MICROCODE_XEN=y CONFIG_PCI_XEN=y CONFIG_XEN_BLKDEV_FRONTEND=m CONFIG_XEN_NETDEV_FRONTEND=m CONFIG_XEN_KBDDEV_FRONTEND=m CONFIG_HVC_XEN=y CONFIG_XEN_FBDEV_FRONTEND=m CONFIG_XEN_BALLOON=y CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XEN_BLKDEV_BACKEND=y CONFIG_XEN_NETDEV_BACKEND=y CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=m CONFIG_XEN_S3=y CONFIG_ACPI_PROCESSOR_XEN=y

Marc

_______________________________________________ Xen-devel mailing list Xen-@lists.xensource.com http://lists.xensource.com/xen-devel