2 messages in net.nether.puck.cisco-nsp[c-nsp] Re: 5509 slot0: access issues
FromSent OnAttachments
McLean PickettJan 18, 2005 1:09 pm 
Clinton WorkJan 18, 2005 1:24 pm 
Actions with this message:
Paste this link in email or IM:
Paste this link in email or IM:
Atom feed for this thread
Paste this URL into your reader:
Subject:[c-nsp] Re: 5509 slot0: access issuesActions...
From:Clinton Work (clin@scripty.com)
Date:Jan 18, 2005 1:24:15 pm
List:net.nether.puck.cisco-nsp

The RSM and Supervisor use differnet flash filesystem formats. You have to reformat the flash card before using it in the Supervisor.

RSM: Class A filesystem Sup III: Class C filesystem

http://www.cisco.com/en/US/partner/products/hw/routers/ps341/products_tech_note09186a00800a7515.shtml

McLean Pickett wrote:

Hello -

I have a 5509 with Sup III engine that is running 5.5(19) on the switch and 12.0(27) on the RSM.

The Sup is set to boot from an image in the bootlfash and uses the config in slot0:switch.cfg (the default).

The RSM boots from an image from slot0:

This morning I logged into the RSM and copied the config file to slot0 using the copy config slot0 command.

Now the Sup cannot read the pcmcia flash card. Dir slot0: gives me: error = -8 Open device slot0 failed (no device)

Any ideas?

Thanks, McLean

_______________________________________________ cisco-nsp mailing list cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/