M. Parsons wrote:
To access my dsl modem's line stats page, I have to create an arp
entry and a route for it, under linux this was done as: (eth1
connected directly to dsl modem)
ifconfig eth1 10.0.0.2 netmask 255.255.255.0
route add 10.0.0.1 dev eth1
route add -net 10.0.0.1/32 -iface de0 -cloning
But 'ifconfig de0 10.0.0.2 netmask 255.255.255.0' (or ifconfig de0
10.0.0.2/24) should set a 10.0.0.0/24 route via de0 why would you want
to set it again ?
arp -s 10.0.0.1 ffffffffffffffffff (not really fffff, but the MAC
address of the dsl modem, NOT the nic).
unfortunately, I cant seem to figure out the commands to get this to
work under FreeBSD 5.3
Ifconfig is simple enough (replace eth1 with de0 in my case)
Arp seems the same (except it needs colons)
But the route command I have no clue. It doesnt seem to follow the
same syntax as linux, and I havent figured out the correct syntax yet.
free...@freebsd.org mailing list
To unsubscribe, send any mail to "free...@freebsd.org"