58 messages in net.nether.puck.cisco-nsp[c-nsp] 2811 router doesn't recognize...
FromSent OnAttachments
Jay HenniganJan 24, 2005 8:17 pm 
Jay HenniganJan 24, 2005 10:13 pm 
Matt HillJan 24, 2005 10:18 pm 
Jay HenniganJan 24, 2005 11:15 pm 
Koen PeetermansJan 25, 2005 4:08 am 
r.sahneyJan 25, 2005 10:24 am 
Koen PeetermansJan 25, 2005 10:46 am 
Koen PeetermansJan 25, 2005 10:49 am 
Steven BertschJan 25, 2005 11:18 am 
Tim JacksonJan 25, 2005 1:25 pm 
Chris CappuccioJan 26, 2005 4:13 am 
MADMANJan 26, 2005 10:14 am 
John NeibergerJan 26, 2005 10:16 am 
Rodney DunnJan 26, 2005 10:25 am 
John NeibergerJan 26, 2005 10:36 am 
Dave TemkinJan 26, 2005 10:46 am 
Rodney DunnJan 26, 2005 10:52 am 
John NeibergerJan 26, 2005 10:54 am 
MADMANJan 26, 2005 10:57 am 
Gert DoeringJan 26, 2005 11:00 am 
Brian VowellJan 26, 2005 11:05 am 
John NeibergerJan 26, 2005 11:06 am 
Rodney DunnJan 26, 2005 11:07 am 
Rodney DunnJan 26, 2005 11:09 am 
Gert DoeringJan 26, 2005 11:13 am 
james edwardsJan 26, 2005 11:23 am 
David PrallJan 26, 2005 11:45 am 
Dave TemkinJan 26, 2005 11:46 am 
MADMANJan 26, 2005 11:46 am 
Rodney DunnJan 26, 2005 12:01 pm 
Rodney DunnJan 26, 2005 2:00 pm 
MADMANJan 26, 2005 2:58 pm 
Rodney DunnJan 26, 2005 3:21 pm 
james edwardsJan 26, 2005 5:06 pm 
MADMANJan 26, 2005 5:19 pm 
Jay HenniganJan 26, 2005 7:03 pm 
Jay HenniganJan 26, 2005 7:10 pm 
Jay HenniganJan 26, 2005 8:40 pm 
Kevin GrahamJan 26, 2005 10:44 pm 
Jay HenniganJan 26, 2005 11:29 pm 
Ryan O'ConnellJan 27, 2005 3:23 am 
Dave TemkinJan 27, 2005 4:59 am 
Rodney DunnJan 27, 2005 11:03 am 
lis...@hojmark.orgJan 27, 2005 6:35 pm 
lis...@hojmark.orgJan 27, 2005 6:46 pm 
Rodney DunnJan 27, 2005 8:04 pm 
Ted MittelstaedtJan 28, 2005 12:41 am 
Tantsura, JeffJan 28, 2005 5:41 am 
Per CarlsonJan 28, 2005 6:14 am 
Dave TemkinJan 28, 2005 7:17 am 
Joe MaimonJan 28, 2005 8:14 am 
Cheung, RickJan 28, 2005 8:30 am 
Gert DoeringJan 28, 2005 1:16 pm 
Tantsura, JeffJan 31, 2005 4:59 am 
Gert DoeringJan 31, 2005 5:05 am 
Elmar K. BinsJan 31, 2005 5:37 am 
Tantsura, JeffJan 31, 2005 6:01 am 
Gert DoeringJan 31, 2005 6:29 am 
Actions with this message:
Paste this link in email or IM:
Paste this link in email or IM:
Atom feed for this thread
Paste this URL into your reader:
Subject:[c-nsp] 2811 router doesn't recognize T-1 WICs?Actions...
From:Tim Jackson (ti@angelinacounty.net)
Date:Jan 25, 2005 1:25:23 pm
List:net.nether.puck.cisco-nsp

I've got 2x WIC-1DSU-T1-V2 cards in our 3845. Here's a sho diag:

WIC Slot 0: FT1 PMC4351 Hardware Revision : 1.0 PCB Serial Number : FOC07311ACY Part Number : 73-8346-03 Board Revision : A0 RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Deviation Number : 0-0 Product (FRU) Number : WIC-1DSU-T1-V2 Top Assy. Part Number : 800-22193-01 CLEI Code : IP4I380GAA EEPROM format version 4

We bought these cards somewhere on ebay for quite cheap after we found out the
old WIC-1DSU-T1 cards wouldn't work in our 3845.

-Tim

-----Original Message----- From: cisco-nsp-bounces at puck.nether.net on behalf of Steven Bertsch Sent: Tue 1/25/2005 10:00 AM To: Jay Hennigan; cisco-nsp at puck.nether.net Cc: Subject: Re: [c-nsp] 2811 router doesn't recognize T-1 WICs?

Jay,

I'm in the same boat. Cisco no longer supports WIC-1DSU-T1, but supposedly supports the WIC-1DSU-T1-V2 card in the 2821, but I have been unable to get any to work.

I decided to go with a multiflex card instead which shows up just fine. In my case, a VWIC-2MFT-T1-DI, which can terminate two T1 channel-groups with add/drop support.

A VWIC-1MFT-T1 should work fine as a replacement for a WIC-1DSU-T1-V2 for most applications.

At 07:17 PM 1/24/2005, Jay Hennigan wrote:

Hello fellow Cisco-NSP folk.

I have a brand new 2811 router which according to the Cisco DPRG configurator is supposed to take the WIC-1DSU-T1-V2 modular WICs as opposed to the non-V2 type.

So we paid the higher price for brand-spanking-new V2 modules, and they don't show up. "sho diag" gives:

WIC Slot 0: Unknown WAN daughter card WIC module not supported/disabled in this slot Hardware revision 64.0 Board revision >1 Serial number 1379991808 Part number 800-7441222-79 Test history 0x43 RMA number 48-55-51 Connector type PCI EEPROM format version 1 EEPROM contents (hex): 0x20: 01 80 40 00 52 41 01 00 C1 8B 46 4F 43 30 37 33 0x30: 31 31 41 36 4A 82 49 20 9A 03 42 41 30 03 00 81

Tried two different WICs in all slots with similar results.

Is there some magic needed to get these recognized or do I have a hardware issue? The box is running IP-Base 12.3(11)T2, same results with 12.3(8)T.

-- Jay Hennigan - CCIE #7880 - Network Administration - jay at west.net WestNet: Connecting you to the planet. 805 884-6323 WB6RDV NetLojix Communications, Inc. - http://www.netlojix.com/

_______________________________________________ cisco-nsp mailing list cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/

Regards,

_______________________________________________________________ Steven Bertsch, System Administrator Infinity AccessNET sbertsch at iaxs.net Voice 952/944-7123 x161 http://www.iaxs.net/ Fax 952/944-0115

_______________________________________________________________ Your Business Internet Service Provider

_______________________________________________ cisco-nsp mailing list cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/