-----Original Message----- From: cisc...@puck.nether.net
[mailto:cisc...@puck.nether.net] On Behalf Of james edwards Sent: gioved? 13 gennaio 2005 23.23 To: cisc...@puck.nether.net Subject: [c-nsp] CRC errors on DS3 interface

If I am seeing DS3 errors on the main interface (PA-A3-T3) are these DS3 CRC's
or AAL5 CRC's ?

ATM4/0 is up, line protocol is up Hardware is ENHANCED ATM PA Description: Qwest 54/HFGJ/000332//ACSO MTU 4470 bytes, sub MTU 4470, BW 44210 Kbit, DLY 190 usec, reliability 255/255, txload 19/255, rxload 5/255 Encapsulation ATM, loopback not set Encapsulation(s): AAL5 4095 maximum active VCs, 544 current VCCs VC Auto Creation Disabled. VC idle disconnect time: 300 seconds 0 carrier transitions Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 2d01h Input queue: 0/75/16/0 (size/max/drops/flushes); Total output drops: 4 Queueing strategy: Per VC Queueing 5 minute input rate 926000 bits/sec, 500 packets/sec 5 minute output rate 3370000 bits/sec, 716 packets/sec 61096504 packets input, 3481150315 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 5395 input errors, 4286 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 88573704 packets output, 2959003499 bytes, 0 underruns 4 output errors, 0 collisions, 0 interface resets 0 output buffer failures, 0 output buffers swapped out
_______________________________________________ cisco-nsp mailing list cisc...@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/