I bet if you turn off LMI, it will work.
Mike
----- Original Message -----
From: "Brad Bonin" <br...@cisco.com>
To: "'Rob Polland'" <rpol...@gmail.com>; <cisc...@puck.nether.net>
Sent: Tuesday, January 04, 2005 6:43 AM
Subject: RE: [c-nsp] Cisco router and 3 com back to back with frame-relay
http://www.cisco.com/en/US/customer/tech/tk713/tk237/technologies_configuration_example09186a0080094a3b.shtml
Ping me direct if needed.
If it doesn't work, I blame it on 3com:-)
-----Original Message-----
From: cisc...@puck.nether.net
[mailto:cisc...@puck.nether.net] On Behalf Of Rob Polland
Sent: Tuesday, January 04, 2005 6:57 AM
To: cisc...@puck.nether.net
Subject: [c-nsp] Cisco router and 3 com back to back with frame-relay
we have 2 routers , 1 cisco 1700 router and the other is 3 com router.
we connected the two router back to back using v35 cables and we configure
cisco router as a dce ( layer 1), then we configure frame
relay switching and frame realy intf-type dce , encapsulation frame relay
ietf and lmi type is ansi , but always the connection is
up and line protocol is down, does anybody know how to configure the two
routers for a complete back to back scenario
thanks in advance
3 messages in net.nether.puck.cisco-nsp[c-nsp] Cisco router and 3 com back t...
