| I installed FreeBSD 2.2.2 to the NEC 6200 MMX laptop

i have installed 2.2.2 and XFree86 3.3 on my NEC 6030x. it uses the same chip for video, so my XConfig should work for you.

i tweaked with it enough just to get it to work. so this is not "optimized" in any way.

...bryan

-- bryan o'connor technical Yahoo!

-----8<----- cut here -----8<-----

# $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.28 1996/09/01
04:14:45 dawes Exp $ # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # $XConsortium: XF86Conf.cpp /main/16 1996/01/31 10:03:57 kaleb $

# ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. This man page is installed as /usr/X11R6/man/man5/XF86Config.5 # **********************************************************************

# ********************************************************************** # Files section. This allows default font and rgb paths to be set # **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods)

FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/bakoma/"

# For OSs that support Dynamically loaded modules, ModulePath can be # used to set a search path for the modules. This is currently supported # for Linux ELF, FreeBSD 2.x and NetBSD 1.x. The default path is shown # here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# ********************************************************************** # Module section -- this is an optional section which is used to specify # which dynamically loadable modules to load. Dynamically loadable # modules are currently supported only for Linux ELF, FreeBSD 2.x # and NetBSD 1.x. Currently, dynamically loadable modules are used # only for some extended input (XInput) device drivers. # ********************************************************************** # # Section "Module" # # This loads the module for the Joystick driver # # Load "xf86Jstk.so" # # EndSection

# ********************************************************************** # Server flags section. # **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging

# NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event.

# DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events.

# DontZoom

# Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error.

# DisableVidModeExtension

# Uncomment this to enable the use of a non-local xvidtune client.

# AllowNonLocalXvidtune

# Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings.

# DisableModInDev

# Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset).

# AllowNonLocalModInDev

EndSection

# ********************************************************************** # Input devices # **********************************************************************

# ********************************************************************** # Keyboard section # **********************************************************************

Section "Keyboard"

Protocol "Standard"

# when using XQUEUE, comment out the above line, and uncomment the # following line

# Protocol "Xqueue"

AutoRepeat 500 5

# Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock:

# LeftAlt Meta # RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock

# To disable the XKEYBOARD extension, uncomment XkbDisable.

# XkbDisable

# To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:swapcaps"

# These are the default XKB settings for XFree86 # XkbRules "xfree86" # XkbModel "pc101" # XkbLayout "us" # XkbVariant "" # XkbOptions ""

EndSection

# ********************************************************************** # Pointer section # **********************************************************************

Section "Pointer" Protocol "PS/2" Device "/dev/mouse" Emulate3Buttons # ChordMiddle EndSection

# ********************************************************************** # Monitor section # **********************************************************************

# Any number of monitor sections may be present

Section "Monitor" Identifier "6030X" VendorName "NEC" ModelName "6030X"

HorizSync 10-80 # multisync VertRefresh 30-120 # multisync

Mode "1024x768" # DotClock 25.175 DotClock 30.175 HTimings 1024 1025 1026 1027 VTimings 768 769 770 771 EndMode EndSection

# ********************************************************************** # Graphics device section # **********************************************************************

# Any number of graphics device sections may be present

Section "Device" # SVGA server auto-detected chipset Identifier "CT65550" VendorName "Chips&Technologies" BoardName "65550" EndSection

Section "Screen" Driver "svga" Device "CT65550" Monitor "6030X" DefaultColorDepth 16 Subsection "Display" Depth 16 Modes "1024x768" ViewPort 0 0 Virtual 1024 768 EndSubsection EndSection