--- dmesg.old 2011-04-12 21:26:44.000000000 +0200 +++ dmesg.new 2011-04-12 21:24:12.000000000 +0200 @@ -16,17 +16,17 @@ APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) -MADT: Found CPU APIC ID 3 ACPI ID 1: enabled -SMP: Added CPU 3 (AP) -MADT: Found CPU APIC ID 1 ACPI ID 2: enabled +MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) +MADT: Found CPU APIC ID 3 ACPI ID 2: enabled +SMP: Added CPU 3 (AP) MADT: Found CPU APIC ID 2 ACPI ID 3: enabled SMP: Added CPU 2 (AP) Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. -FreeBSD 9.0-CURRENT #0: Mon Mar 7 17:47:26 SAST 2011 +FreeBSD 9.0-CURRENT #0: Tue Apr 12 21:09:23 SAST 2011 root@dragon.dg:/tmp/home/freebsd9/src/sys/DRAGON amd64 Table 'FACP' at 0xcfff30c0 Table 'HPET' at 0xcfff7940 @@ -35,25 +35,24 @@ Table 'SSDT' at 0xcfff7a40 Table 'SSDT' at 0xcfff7ff0 ACPI: No SRAT table found -Preloaded elf kernel "/boot/dragon/kernel" at 0xffffffff819ce000. -Preloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff819ce1d0. -Preloaded elf obj module "/boot/dragon/geom_sched.ko" at 0xffffffff819ce7c0. -Preloaded elf obj module "/boot/dragon/gsched_rr.ko" at 0xffffffff819cee70. -Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff819cf3e0. -Calibrating TSC clock ... TSC clock: 2400024582 Hz -CPU: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz (2400.02-MHz K8-class CPU) +Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81a01000. +Preloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff81a011d0. +Preloaded elf obj module "/boot/kernel/geom_sched.ko" at 0xffffffff81a017c0. +Preloaded elf obj module "/boot/kernel/gsched_rr.ko" at 0xffffffff81a01e70. +Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff81a023e0. +CPU: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz (K8-class CPU) Origin = "GenuineIntel" Id = 0x6f7 Family = 6 Model = f Stepping = 7 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100800 AMD Features2=0x1 - TSC: P-state invariant real memory = 6442450944 (6144 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) -0x0000000001a01000 - 0x00000000c34d3fff, 3249352704 bytes (793299 pages) +0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) +0x0000000001a34000 - 0x00000000c34d3fff, 3249143808 bytes (793248 pages) 0x0000000100000000 - 0x00000001affeffff, 2952724480 bytes (720880 pages) -avail memory = 6161305600 (5875 MB) +avail memory = 6162554880 (5877 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: INTR: Adding local APIC 1 as a target @@ -65,14 +64,14 @@ cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 +APIC: CPU 0 has ACPI ID 0 +APIC: CPU 1 has ACPI ID 1 +APIC: CPU 2 has ACPI ID 3 +APIC: CPU 3 has ACPI ID 2 x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x001000-0x001fff at 0xffffff800002a000 x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 -APIC: CPU 0 has ACPI ID 0 -APIC: CPU 1 has ACPI ID 2 -APIC: CPU 2 has ACPI ID 3 -APIC: CPU 3 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 @@ -99,12 +98,12 @@ lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high -lapic3: Routing NMI -> LINT1 -lapic3: LINT1 trigger: edge -lapic3: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high +lapic3: Routing NMI -> LINT1 +lapic3: LINT1 trigger: edge +lapic3: LINT1 polarity: high lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: edge lapic2: LINT1 polarity: high @@ -114,10 +113,9 @@ lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Cuse4BSD v0.1.13 @ /dev/cuse -wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 -null: +wlan: <802.11 Link Layer> random: kbd: new array size 4 kbd1 at kbdmux0 @@ -161,6 +159,7 @@ VESA: NVIDIA VESA: NVIDIA Corporation G73 Board - p345h0 Chip Rev io: +null: GEOM_SCHED: Modevent 0. GEOM_SCHED: Initializing global data. GEOM_SCHED: Loaded module rr error 0. @@ -452,6 +451,7 @@ lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit +pcib0: Enabling MSI window for HyperTransport slave at pci0:0:9:0 found-> vendor=0x10de, dev=0x0270, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 @@ -490,13 +490,13 @@ pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.APCF:0) pci_link28: Picked IRQ 21 with weight 0 pcib0: slot 11 INTA routed to irq 21 via \_SB_.PCI0.APCF - found-> vendor=0x10de, dev=0x026e, revid=0xa3 domain=0, bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=10 + powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xe7006000, size 8, enabled pcib0: matched entry for 0.11.INTB (src \_SB_.PCI0.APCL:0) @@ -616,14 +616,14 @@ ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50 usbus0: on ohci0 usbus0: bpf attached -ohci0: usbpf attached +ohci0: usbpf: Attached ehci0: mem 0xe7006000-0xe70060ff irq 22 at device 11.1 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51 ehci0: Doorbell workaround enabled usbus1: EHCI version 1.0 usbus1: on ehci0 usbus1: bpf attached -ehci0: usbpf attached +ehci0: usbpf: Attached atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 13.0 on pci0 ata0: on atapci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 @@ -737,7 +737,7 @@ psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 -acpi0: wakeup code va 0xffffff81b14cd000 pa 0x4000 +acpi0: wakeup code va 0xffffff81a4d89000 pa 0x4000 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it @@ -777,8 +777,7 @@ Device configuration finished. linprocfs registered procfs registered -Timecounter "TSC" frequency 2400024582 Hz quality -100 -lapic: Divisor 2, Frequency 133334705 Hz +lapic: Divisor 2, Frequency 133332449 Hz Timecounters tick every 10.000 msec vlan: initialized, using hash tables with chaining Linux ELF exec handler installed @@ -791,24 +790,71 @@ uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 -ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire -: ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire +: Loading: mp = 0xffffffff80c4f0c0, g_sched_class = 0xffffffff80c4f0c0. +uhub0: 8 ports with 8 removable, self powered +ata0: reiniting channel .. +ata0: reset tp1 mask=03 ostat0=10 ostat1=58 +ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb +ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb +ata0: reset tp2 stat0=10 stat1=00 devices=0x30000 +ata0: reinit done .. +unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0 +ata0: reiniting channel .. +ata0: reset tp1 mask=03 ostat0=10 ostat1=58 +ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb +ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb +ata0: reset tp2 stat0=10 stat1=00 devices=0x30000 +ata0: reinit done .. +unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0 +ata0: reiniting channel .. +ata0: reset tp1 mask=03 ostat0=58 ostat1=00 +ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb +ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb +ata0: reset tp2 stat0=10 stat1=00 devices=0x30000 +ata0: reinit done .. +unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0 +uhub1: 8 ports with 8 removable, self powered +ata0: reiniting channel .. +ata0: reset tp1 mask=03 ostat0=58 ostat1=00 +ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb +ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb +ata0: reset tp2 stat0=10 stat1=00 devices=0x30000 +ata0: reinit done .. +unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0 ata1: Identifying devices: 00000000 ata1: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 -Loading: mp = 0xffffffff80c1be60, g_sched_class = 0xffffffff80c1be60.ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire - -ad4: setting UDMA100 -ad4: 305244MB at ata2-master UDMA100 SATA 1.5Gb/s -ad4: 625140335 sectors [620178C/16H/63S] 16 sectors/interrupt 1 depth queue +ata2: reiniting channel .. +ata2: SATA connect time=0ms status=00000113 +ata2: reset tp1 mask=01 ostat0=58 ostat1=00 +ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 +ata2: reset tp2 stat0=50 stat1=00 devices=0x1 +ata2: reinit done .. +unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 +ata2: reiniting channel .. +ata2: SATA connect time=0ms status=00000113 +ata2: reset tp1 mask=01 ostat0=58 ostat1=00 +ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 +ata2: reset tp2 stat0=50 stat1=00 devices=0x1 +ata2: reinit done .. +unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 ata3: Identifying devices: 00000001 ata3: New devices: 00000001 -GEOM: new disk ad4 -ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire -ad6: setting UDMA100 -ad6: 476938MB at ata3-master UDMA100 SATA 1.5Gb/s -ad6: 976771055 sectors [969018C/16H/63S] 16 sectors/interrupt 1 depth queue +ata3: reiniting channel .. +ata3: SATA connect time=0ms status=00000113 +ata3: reset tp1 mask=01 ostat0=58 ostat1=00 +ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 +ata3: reset tp2 stat0=50 stat1=00 devices=0x1 +ata3: reinit done .. +unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 +ata3: reiniting channel .. +ata3: SATA connect time=0ms status=00000113 +ata3: reset tp1 mask=01 ostat0=58 ostat1=00 +ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 +ata3: reset tp2 stat0=50 stat1=00 devices=0x1 +ata3: reinit done .. +unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 hdac0: Probing codec #0... hdac0: HDA Codec #0: Realtek ALC888 hdac0: HDA Codec ID: 0x10ec0888 @@ -918,6 +964,7 @@ hdac0: Widget cap: 0x00000011 hdac0: STEREO hdac0: Association: 0 (0x00000001) + hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000001 hdac0: PCM @@ -957,7 +1004,6 @@ hdac0: PCM cap: 0x000e0560 hdac0: 16 20 24 bits, 44 48 96 192 KHz hdac0: - hdac0: nid: 6 hdac0: Name: audio output hdac0: Widget cap: 0x00000211 @@ -1419,6 +1465,7 @@ pcm0: PCM pcm0: PCM cap: 0x000e0560 pcm0: 16 20 24 bits, 44 48 96 192 KHz + pcm0: DAC: 2 3 4 5 pcm0: pcm0: Record: @@ -1458,7 +1505,6 @@ pcm0: pcm0: nid=23 [pin: Line-out (Grey Jack)] pcm0: | - pcm0: + <- nid=15 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=5 [audio output] [src: pcm] @@ -1575,8 +1621,8 @@ pcm0: Mixer "igain": pcm0: Soft PCM mixer ENABLED pcm0: clone manager: deadline=750ms flags=0x8000001e -pcm0: sndbuf_setmap 49e0000, 4000; 0xffffff81b14db000 -> 49e0000 -pcm0: sndbuf_setmap 49f0000, 4000; 0xffffff81b14eb000 -> 49f0000 +pcm0: sndbuf_setmap 1aff90000, 4000; 0xffffff81a4d97000 -> 1aff90000 +pcm0: sndbuf_setmap 1affa0000, 4000; 0xffffff81a4da7000 -> 1affa0000 pcm1: at cad 0 nid 1 on hdac0 pcm1: +--------------------------------------+ pcm1: | DUMPING PCM Playback/Record Channels | @@ -1668,8 +1714,8 @@ pcm1: Mixer "monitor": pcm1: Soft PCM mixer ENABLED pcm1: clone manager: deadline=750ms flags=0x8000001e -pcm1: sndbuf_setmap 4b10000, 4000; 0xffffff81b14fb000 -> 4b10000 -pcm1: sndbuf_setmap 4b20000, 4000; 0xffffff81b150b000 -> 4b20000 +pcm1: sndbuf_setmap 1affb0000, 4000; 0xffffff81a4db7000 -> 1affb0000 +pcm1: sndbuf_setmap 49f0000, 4000; 0xffffff81a4dc7000 -> 49f0000 pcm2: at cad 0 nid 1 on hdac0 pcm2: +--------------------------------------+ pcm2: | DUMPING PCM Playback/Record Channels | @@ -1717,18 +1763,18 @@ pcm2: Mixer "pcm": parent="vol" pcm2: Soft PCM mixer ENABLED pcm2: clone manager: deadline=750ms flags=0x8000001e -pcm2: sndbuf_setmap 4b30000, 4000; 0xffffff81b151b000 -> 4b30000 -pcm2: sndbuf_setmap 4b50000, 4000; 0xffffff81b152b000 -> 4b50000 -SMP: AP CPU #2 Launched! -cpu2 AP: - ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff - lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff - timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 +pcm2: sndbuf_setmap 47c0000, 4000; 0xffffff81a4dd7000 -> 47c0000 +pcm2: sndbuf_setmap 47d0000, 4000; 0xffffff81a4de7000 -> 47d0000 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 +SMP: AP CPU #2 Launched! +cpu2 AP: + ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff + lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff + timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff @@ -1742,114 +1788,29 @@ nioapic0: routing intpin 16 (ePCI IRQ 16r) to lapic 3 vector 49 ioapic0: routing intpin 20 (sPCI IRQ 20t) to lapic 1 vector 50 aioapic0: routing intpin 21 (rPCI IRQ 21t) to lapic 2 vector 50 -eioapic0: routing intpin 22 (dPCI IRQ 22 -) to lapic 3 vector 50 -unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 -(probe0:ata0:0:0:unknown: 0): FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 uhub0: sks=0x48 0x00 0x01 -8 ports with 8 removable, self powered -SCSI status error -GEOM: new disk ad6 -(probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0 -(probe0:ata0:0:0:0): CAM status: SCSI Status Error -(probe0:ata0:0:0:0): SCSI status: Check Condition -(probe0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) -(probe0:ata0:0:0:0): Error 22, Unretryable error -(probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0? -(probe1:GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). -ata0:0:GEOM: ad4s1: media size does not match label. -1:0): SCSI status error -(probe1:ata0:0:1:0): INQUIRY. CDB: 12 1 0 0 ff 0 -(probe1:ata0:0:1:0): CAM status: SCSI Status Error -(probe1:ata0:0:1:0): SCSI status: Check Condition -(probe1:ata0:0:1:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB): Command byte 1 bit 0 is invalid -(probe1:ata0:0:1:0): Error 22, Unretryable error -(probe1:ata0:0:1:0): Down reving Protocol Version from 2 to 0? -GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s). -GEOM: ad6s1: media size does not match label. -GEOM_MIRROR: Device mirror/gm0 launched (2/2). -Root mount waiting for: usbus1 -(probe0:ata0:0:0:0): SCSI status error -(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 -(probe0:ata0:0:0:0): CAM status: SCSI Status Error -(probe0:ata0:0:0:0): SCSI status: Check Condition -(probe0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) -(probe0:ata0:0:0:0): Error 6, Unretryable error -GEOM: new disk cd0 -pass0 at ata0 bus 0 scbus0 target 0 lun 0 -pass0: Removable CD-ROM SCSI-0 device -pass0: 3.300MB/s transfers -uhub1: 8 ports with 8 removable, self powered -(probe1:ata0:0:1:0): SCSI status error -(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 -(probe1:ata0:0:1:0): CAM status: SCSI Status Error -(probe1:ata0:0:1:0): SCSI status: Check Condition -(probe1:ata0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) -(probe1:ata0:0:1:0): Retrying command (per sense data) -(cd0:ata0:0:0:0): SCSI status error -(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 -(cd0:ata0:0:0:0): CAM status: SCSI Status Error -(cd0:ata0:0:0:0): SCSI status: Check Condition -(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) -(cd0:ata0:0:0:0): Error 6, Unretryable error -cd0 at ata0 bus 0 scbus0 target 0 lun 0 -cd0: Removable CD-ROM SCSI-0 device -cd0: 3.300MB/s transfers -cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed -(probe1:ata0:0:1:0): SCSI status error -(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 -(probe1:ata0:0:1:0): CAM status: SCSI Status Error -(probe1:ata0:0:1:0): SCSI status: Check Condition -(probe1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) -(probe1:ata0:0:1:0): Error 6, Unretryable error -pass1 at ata0 bus 0 scbus0 target 1 lun 0 -pass1: Removable CD-ROM SCSI-0 device -pass1: 3.300MB/s transfers -(cd1:ata0:0:1:0): SCSI status error -(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 -(cd1:ata0:0:1:0): CAM status: SCSI Status Error -(cd1:ata0:0:1:0): SCSI status: Check Condition -(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) -(cd1:ata0:0:1:0): Error 6, Unretryable error -cd1 at ata0 bus 0 scbus0 target 1 lun 0 -cd1: Removable CD-ROM SCSI-0 device -cd1: 3.300MB/s transfers -cd1: Attempt to query device size failed: NOT READY, Medium not present -(cd0:ata0:0:0:0): SCSI status error -(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 -(cd0:ata0:0:0:0): CAM status: SCSI Status Error -(cd0:ata0:0:0:0): SCSI status: Check Condition -(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) -(cd0:ata0:0:0:0): Error 6, Unretryable error -(cd0:ata0:0:0:0): SCSI status error -(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 -(cd0:ata0:0:0:0): CAM status: SCSI Status Error -(cd0:ata0:0:0:0): SCSI status: Check Condition -(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) -(cd0:ata0:0:0:0): Error 6, Unretryable error -(cd0:ata0:0:0:0): SCSI status error -(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 -(cd0:ata0:0:0:0): CAM status: SCSI Status Error -(cd0:ata0:0:0:0): SCSI status: Check Condition -(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) -(cd0:ata0:0:0:0): Error 6, Unretryable error -GEOM: new disk cd1 -(cd1:ata0:0:1:0): SCSI status error -(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 -(cd1:ata0:0:1:0): CAM status: SCSI Status Error -(cd1:ata0:0:1:0): SCSI status: Check Condition -(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) -(cd1:ata0:0:1:0): Error 6, Unretryable error -(cd1:ata0:0:1:0): SCSI status error -(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 -(cd1:ata0:0:1:0): CAM status: SCSI Status Error -(cd1:ata0:0:1:0): SCSI status: Check Condition -(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) -(cd1:ata0:0:1:0): Error 6, Unretryable error -(cd1:ata0:0:1:0): SCSI status error -(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 -(cd1:ata0:0:1:0): CAM status: SCSI Status Error -(cd1:ata0:0:1:0): SCSI status: Check Condition -(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) -(cd1:ata0:0:1:0): Error 6, Unretryable error +) to lap: routing intpin 22 (dPCI IRQ 22 + ic 3 vector 50 Trying to mount root from ufs:/dev/mirror/gm0a [rw]... -start_init: trying /sbin/init +mountroot: waiting for device /dev/mirror/gm0a ... +Mounting from ufs:/dev/mirror/gm0a failed with error 19. + +Loader variables: + vfs.root.mountfrom=ufs:/dev/mirror/gm0a + vfs.root.mountfrom.options=rw + +Manual root filesystem specification: + : [options] + Mount using filesystem + and with the specified (optional) option list. + + eg. ufs:/dev/da0s1a + zfs:tank + cd9660:/dev/acd0 ro + (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /) + + ? List valid disk boot devices + . Yield 1 second (for background tasks) + Abort manual input + +mountroot> +